Wireless RS232 keyboard, wireless serial keyboard, wireless serial keypad , wireless RS232 keypad. Wireless ASCII keyboard, wireless ASCII keypad. RS232 wireless, Embedded wireless keyboard. Wireless keyboard adapter. Wireless serial. Wireless RS232, universal keyboard, universal keyboard.
WLKB232-xxxV2 Wireless RS232 Keyboard Adapter   by Versalent   Home

Uses any standard wired or wireless USB keyboard converting it to RS232 for general use with any UART system. WLKB232V2 is the first device to provide a simple USB HID Composite host which can communicate with a standard USB keyboard and convert the keycodes to standard ASCII RS232 characters for use with any host via a serial UART. In addition the WLKB232V2 can be user-programmed to override the standard key-cap characters and output alternate characters or strings (up to 10-characters) for any keypress. The typical range of a wireless keyboard to its dongle is 30 feet. Can be ordered in DCE or DTE* pin configurations (both with DB9 female).
custom keyboard=> serial keyboard=> rs232 keyboard=>
Wired or Wireless USB KeyboardRF
Signal		Keyboard
Receiver		 Versalent WLKB232-xxxV2
USB Keyboard Adapter		  
  |----- (or wire) -----|

  Application Diagram  

Full Manual           Wireless Serial Adapter           Key Code Map

Support Utilities
(Download, unzip, and run the included setup.exe)
Simple Term (terminal emulator/displays even non-printable characters) download

WLKB232V2 Configuration Program (optional configuration program that allows you to define custom output strings) download
See configuration notes here.

WLKB232V2 .. converts an RF wireless USB keyboard to a wireless RS232 keyboard
WLKB232V2 Datasheet by Versalent
FEATURES
  • Converts Wireless Keyboard to programmable RS232-output keyboard
  • Your system does not need USB .. it receives RS232 characters
  • Converts USB-Keyboard Codes to simple ASCII
  • All keys can be programmed to output custom strings
  • Non-ASCII Keys Send 8-bit Characters
  • Keyboard LEDs Fully Operational
  • ALT/CTRL/NUM LOCK fully functional
  • RS-232 Connection To Host W/Selectable Baud/Parity. Baud rates from 600 to 115k
  • Operates on 5VDC, or 6-12VDC,or w/optional wall adapter
  • V2 devices compatible with previous V1 but with NumLock Override feature.
  • programmable baud rate (models ending with E)
APPLICATIONS
  • Systems without USB support, or no HID drivers
  • Replacement of RS232 CNC keyboards at low cost
  • Embedded systems needing wireless keyboards
 DESCRIPTION

       WLKB232V2 is a 2.6" X 1.7" X 0.8" module which provides translation of wireless USB keycodes to serial RS232 characters. This allows even small microcontroller systems to incorporate wireless keyboards without any of the development complexity of USB and HID drivers. RS232 key-cap characters are available from the wireless keyboard by simply plugging the WLKB232V2 into your system with a DB9 cable. By operating with standard industry-leading wireless keyboards you get the assurance of a reliable RF link.    Manual available here

Typically works with all USB wireless (and wired) keyboards or keyboard/mouse combos which do NOT require special drivers to operate on a PC. Although most wireless keyboards include a driver CD for special features, many work with the default Microsoft OS USB drivers and these will work with the WLKB232V2.

xxxE models add programmable baud feature. Backward compatible with jumper-only baud settings, eliminating the need to open the case to change baud.

WLKB232-xxxV2 is available with power source and RS-232 options to provide the flexibility to mate to a variety of systems without additional adapters.
*All units whether DTE or DCE provide DB9 female connector
Models Available

Model NumberDefining Features
WLKB232-014V2, -014V2E DB9=DCE, +5.0VDC Power supplied via DB9 Pin 4
WLKB232-016V2, -016V2E DB9=DCE, +5.0VDC Power supplied via DB9 Pin 6
WLKB232-024V2*, -024V2E* DB9=DCE, 6VDC to 12VDC Power supplied via DB9 Pin 4, or optional 6-12V wall adapter
WLKB232-026V2*,-026V2E* DB9=DCE, 6VDC to 12VDC Power supplied via DB9 Pin 6, or optional 6-12V wall adapter
WLKB232-034V2, -034V2E DB9=DTE, +5.0VDC Power supplied via DB9 Pin 4
WLKB232-036V2, -036V2E DB9=DTE, +5.0VDC Power supplied via DB9 Pin 6
WLKB232-044V2*,-044V2E* DB9=DTE, 6VDC to 12VDC Power supplied via DB9 Pin 4, or optional 6-12V wall adapter
WLKB232-046V2*,-046V2E* DB9=DTE, 6VDC to 12VDC Power supplied via DB9 Pin 6, or optional 6-12V wall adapter
* These models cost slightly more due to additional internal regulator.
Models ending with E include E-Baud feature -- baud rate can be set electronically without opening the case
Note: DCE Models plug directly into COM port with no pin-swaping
Warranty   Home
Questions:   sales@versalent.biz  Technical:  support@versalent.biz